Price: $549.99 - $379.99
(as of Nov 22, 2024 23:12:21 UTC – Details)
B0CGJ3S8YM,
Product Description
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
…, 4, Reviewer: Will
Rating: 5.0 out of 5 stars
Title: Look great, work great, fairly easy install.
Review: TLDR: Look great, work great, fairly easy install. Govee Permanent Outdoor Lights Pro are the way to go.Really glad I didn’t pull the trigger on the first gen lights and waited for the Govee Outdoor Lights Pro. The 200′ was perfect for my needs and I ended up using 196′ and clipping off the last few lights. With the booster module it’s great being able to power the entire thing from one end instead of having to do power injection or plug in at multiple places. The Pro version gives you options for extending, cutting and splicing that wasn’t possible before. The splice units are super easy to use with Wago style toggle connections. The short and long extensions are great if you need to skip an area, say to go up to a second story. I couldn’t find the exact contents for the 200′ set anyplace, so here’s what came in mine: 12 stands of lights; 4 each male and female splice connectors; 4 – 4′ extension cables; 2 – 12′ extension cables; power brick, control unit, signal booster (for 200′ for kit only); lots of mounting clips and extra adhesive tabs. Really wanted a clean looking install so I mounted the power and control units inside an Orbit irrigation control box after running power to my install location. Also wanted to minimize clip use and bought some 3D printed mounting brackets that fit over the lights. They make the lights look slightly bulkier but I was able to limit clip use to turning corners or working around an obstacle. I spent a lot of time untwisting and flattening the cable to get it as flat as possible. Kind of a pain but the flat cable is what makes splicing possible for DIYers so I’m not complaining. The instructions say to use an automatic wire stripper for splicing. It’s not clear if they were talking about the outer sheath or the three internal wires, but mine absolutely wouldn’t work on the sheath. I had to very carefully cut that with a razor knife. All told it took some non-OSHA approved ladder shenanigans and two full days of work as a somewhat competent DIYer and I’m happy with the results. IMO the Govee Permanent Outdoor Lights Pro are the way to go unless you want to spend thousands on a pixel or puck system and learn Wled. The estimate I got from Jellyfish lights was 6k. While not inexpensive Govee has frequent sales and I got the 200′ set for $560 and saw them for $480 on Prime Day. If you are new to Govee the app isn’t perfect but they update and improve it frequently. There are plenty of lighting options that require only one click to get started. The app has close to 100 preset themes for holidays, seasons, etc. The video is the “Universe” theme, pics are warm and cool white respectively. The pro have dedicated warm and cool white leds that are great for general illumination. Using the app I created an automation so they come on with a color effect 30 minutes after sunset, change to warm white 30% brightness at 12am, then turn off 30 minutes before sunrise. The DIY function allows you to create any combination of colors and patterns you can think of. I’ve been using the new AI bot to create light scenes and it’s kind of fun.
Reviewer: Norm Michaels
Rating: 5.0 out of 5 stars
Title: Easy Install
Review: This was a way more easy install than I expected. I did spend 1 1/2 hours troubleshooting a section of lights that would not light up. I found it to be a bad extension section. I filled out a warranty claim, and a replacement section arrived in the mail within days. Excellent Service.They could use an American to help with their instructions. I kept trying to find a way to save my setup, and after many days figured out that the âSnapshotâ icon was the save button. Most of my learning was from trial and error. It would be nice to have instructions for beginners.My lights are v-e-r-y nice looking.
Reviewer: Timothy Watts
Rating: 5.0 out of 5 stars
Title: It is a small fortune but it is worth it !!!!!!
Review: I did it !!! I broke down and purchased the GOVEE Pro lighting system for my house, everyone on the forms and reviews praised GOVEE for the Quality, the Features, The Functions, The VHB tape, and the lights, from the brightness to the longevity and the vividness of the colors!!!! So Far I can not complain!!!!!! now As you can see in the Pictures I do not have the easiest roof line to hang these lights and when you add the 3 d printed retainer clips it just takes that much longer to complete the job. I am not a young man anymore, I am slower and not as sure footed as i used to be so I decided to forgo the Route of the Ladder(and with 3 18ft peeks I just dreaded doing it) and rented me a 35 ft man lift from the BigBox Store. Now it added to the expense of the job but I would still be out there today (6 weeks LAter) climbing up and down the ladder putting these up. I did order the 200 ft Kit and for my house I was able to completely wrap the lights around my entire house. The final look is amazing!!!! a couple of times for anyone who is concerned about taking on this type of project. I recommend you pre plan your actions; first, you will want to make sure you unwrap your lights from the wire ties they were shipped in. This will do 2 things, one if you hang them in the sunlight it will soften the wire loops and straighten the wires making it easier on your fingertips when you are putting the lights up and you want the wire super straight. Secondly, if you connect your light strands together and lay them out or put them on a spool(I chose the spool because of the man lift, as it kept me from stepping on them) you will not have to reposition too many things every time you move the ladder down the line. ALso you want to figure out before you actually start installing the lights , exactly where you want them to be under the overhang of your roof. I suggest taking a couple of lights and hanging them with temp configuration by hanging 3or 4 as close to the wall as you can and then 3 or 4 in the middle of the overhang and then the last 3 or 4 as far out. This will help you identify what looks the best for your house and your liking. When you have decided on the spacing I took a small piece of cardboard and cut it to the width of where the wire is going to be on the eves. This will allow you to take a pencil mark where the wires need to be and your mark will keep the lines as straight as possible. Next I suggest you have a tool bag/belt with all of the things you will need to complete the project, template for you wire guide and a pencil, a small trash bag for all of the tape covers you will take off, a screwdriver to screw the wire clips (supplied in the Kit) in place. something to keep your screws together so if you need one you can get it easily. also a small pouch or container to separate the wire clips from the screws to easily grab them when needed. You will also want some paper towels and alcohol to clean the spot where you are going to stick the lights so they get a good hold and will not fall off too early. These are just some of the items I needed to put up my lights. You may also want a head mounted flashlight if you don’t have adequate light or doing it in the evening. I took a couple of days to plan out my attach plan because I was renting the MAnlift and needed to maximize the output because of the cost and I only had 24 hrs till I needed to return the lift. so making unnecessary tripe to get a tool or something was just not in the plan and would slow me down. I also chose to pick up some 3 d printed covers for the Govee Pro Lights. They were a bit more expensive, but the piece of mind was that the pod lights were screwed into place along with the VHD tape, and I never would have to rely on just the tape holding the pod in place. Again a bit of an expense but in my situation with the 20 ft peaks I don’t want to climb a ladder if the tape fails in 4 or 5 years!!! The look is much better than expected. and the lights in the picts are set at 15% brightness because 100% is too bright!!! The only complaint I have about these Lights Is with the APP there are so many features and combinations of functions it is a bit overwhelming. Also there is a section where other users can share configurations, which is nice. The only thing is there is no explanation of what each one is and there are thousands of them. so when you click on one and want to come back to it later it may be lost if you are not paying attention to the name on the shared config. also I wish there was a place where you could preconfigure the lights like a lab type environment so you can see what something will look like without it happening in real time. This would help when you are trying to put scenes together and link them for a show!!
Reviewer: Sean C
Rating: 5.0 out of 5 stars
Title:
Review: 200â pro set Came with everything to install, including for splicing, extensions & connecters. The app makes it incredibly easy to switch the lights for any occasion. I had an issue that the light stopped working after two weeks, Contacted Goalie through the app within an hour. They had a replacement set shipped to my house and the lights are working fantastic again and have been for a while now. Incredibly fun and easy to use product with amazing customer support five stars just isnât enough highly recommend!!!!
Reviewer: Shawn Hoskins
Rating: 5.0 out of 5 stars
Title:
Review: Software is very user friendly and easy to setup.The 3M tape works perfectly and instructions are very clear!Great brightness and amazing look with the preset settings.
Reviewer: Derryk Schimpf
Rating: 5.0 out of 5 stars
Title:
Review: Very nice kit that is well put together. Lights are amazing with endless possibilities. We used 150â and did not have to splice at all.If installing at near frost temperatures make sure you use a hair dryer to warm the double sided tape and soffit or the lights will not stick. The small cable clips that come with the kit work but are quite small and do work but there are better options for additional costs. 3D printed light mounts that hold the light and cable would be the easiest, we used 1/4â nylon cable clamps and placed one on either side of each light with 3/4â long Tek screws.Overall very happy and would highly recommend.
Reviewer: Michael Wheaton
Rating: 1.0 out of 5 stars
Title:
Review: We purchased two boxes of the 200ft lights. Had them professionally installed. The two sets looked ok on their own initially but did not sync. I checked the app and realized that the hardware and software versions of the two did not match up, and so contacted the company- One would think that if you purchased two items to go together, they would have sent fully compatible versions. It is now 12 November 2024. The company initially responded to attempt to help me fix the issue. I was diligent in replying and they gradually replied less and less. Now they ignore me entirely. One of the worst customer service experiences I have ever had. Asked for my money back a month ago- still no answer. Would suggest not purchasing if you think you’ll end up needing help at any point after purchase.
Reviewer: Ankush Thakur
Rating: 4.0 out of 5 stars
Title:
Review: I was a bit nervous about installing the Govee Outdoor Permanent Lights Pro due to the height involved, so I hired a professional company to handle the setup. They did an excellent job, and it turned out my neighbors also chose to install these lights! Once they were up and running, I was truly impressed with how incredible they look at night. The lights are vibrant, and they create a beautiful ambiance around my home.However, thereâs some room for improvement with the Govee home app. It can be a bit complicated and isnât as intuitive as Iâd hoped. But overall, these lights have exceeded my expectations, and Iâm thrilled with the end result!
, Tools & Home Improvement > Lighting & Ceiling Fans > Outdoor Lighting > String Lights, #Govee #Permanent #Outdoor #Lights #Pro #150ft #RGBIC #LED,
Instantly Access Your FREE Children’s Books Here!
As an Amazon Associate, I earn from qualifying purchases; I may earn a commission from qualifying purchases as an affiliate.
